Hot melt glue stick is white opaque (strong type), non-toxic, easy to operate, no carbonization in continuous use. It has the characteristics of rapid adhesion, high strength, aging resistance, non-toxicity, good thermal stability, and film toughness. The shape is rod and granular

FEATURE of Hot melt glue stick

1. Hot melt glue stick is non-toxic and tasteless, it is an environmentally friendly chemical product.
2. Hot melt glue stick  is high bonding strength, fast speed, etc. are favored.
3. Hot melt glue stick Can be repeated operation, no pollution, no odor.
4. Hot melt glue stick Can be bent, not easy to break
5. Hot melt glue stick is a 100% solid content adhesive that can be glued in the molten state to get proper flow and wetting.
6. The commonly used hot melt adhesives are EVA based formulations. Such products usually exhibit relatively short open times (typically less than 10 seconds) and very fast curing speed.
7. Gradually lose most of the surface tackiness after fully curing. When the remaining surface has a low viscosity, the edge of the bonding area can be prevented from being contaminated by foreign matter in the future storage or use.

APPLICATION

Hot melt glue sticks are widely used in a variety of manufacturing industries, including packaging, book binding, woodworking, DIY, sanitary, construction, automotive, electronics, footwear, fabric multilayers, product portfolios, tapes, and labels.