Hot melt glue stick is white opaque (strong type), non-toxic, easy to operate, no carbonization in continuous use.

Hot Melt Glue Gun Sticks has the characteristics of rapid adhesion, high strength, aging resistance, non-toxicity, good thermal stability, and film toughness. The shape is rod and granular.

FEATURES OF  Black Hot Melt Glue Sticks

1. Non-toxic and tasteless, it is an environmentally friendly chemical product.

2. Advantages such as high bonding strength, fast speed, etc. are favored.

3. Can be repeated operation, no pollution, no odor.

4. Can be bent, not easy to break

5. Hot melt glue stick is a 100% solid content adhesive that can be glued in the molten state to get proper flow and wetting.

6. The commonly used Polyurethane Hot Melt Adhesive are EVA based formulations. Such products usually exhibit relatively short open times (typically less than 10 seconds) and very fast curing speed.

7. Gradually lose most of the surface tackiness after fully curing. When the remaining surface has a low viscosity, the edge of the bonding area can be prevented from being contaminated by foreign matter in the future storage oruse.

APPLICATION

Hot melt glue sticks are widely used in a variety of manufacturing industries, including packaging, book binding, woodworking, DIY, sanitary, construction, automotive, electronics, footwear, fabric multilayers, product portfolios, tapes, and labels.